Filter
Top Products
70
Chapter 4. Playing the Rhythm Sets
Saving Changed Settings
(WRITE)
Changes in settings are temporary, and are lost when the power is
turned off or when you select another tone. To keep the settings you
have modified, save them to the SH-32’s User Memory.
A dot appears in the display when a Rhythm Set’s settings are
changed. The dot disappears when the settings are saved to the
SH-32.
fig.04-03
Any data currently stored in the location to which the new data
is being saved is overwritten, and therefore lost, when the write
procedure is executed. However, the factory setting data can be
recovered by performing the Factory Reset procedure (p. 94).
1. Make sure that the Rhythm Set you wish to save is selected.
2. Press [WRITE] to make the indicator light.
The Rhythm Set number blinks in the display.
3. Specify the save-destination Rhythm Set with the same
procedure previously used in selecting the Rhythm Set (p.
68). Select a User Rhythm Set (r1U, r2U).
4. Press [WRITE] once again.
The indicator blinks, and the message “ ” (Sure?) blinks in
the display, prompting you to confirm the save.
5. Press [WRITE] once more to execute the save. To cancel the
save, press [EXIT].