Roland TD-10 Drums User Manual


 
The instruments that can be assigned to each trigger are as follows.
: The instrument can be assigned and V-EDIT is possible
: The instrument can be assigned, but V-EDIT is not possible
: Cannot be assigned
Trigger number 1 2 3 456789101112
Inst group \
KICK SNARE TOM1 TOM2 TOM3 TOM4 HI-HAT CRASH1 CRASH2 RIDE AUX1 AUX2
V-KICK ●▲▲▲▲▲▲▲▲▲▲▲
V-SNARE ▲●▲▲▲▲▲▲▲▲▲▲
V-TOM ▲▲●●●●▲▲▲▲▲▲
ELEC KICK ●✕✕✕✕✕✕✕✕✕✕✕
ELEC SNARE ✕●✕✕✕✕✕✕✕✕✕✕
ELEC TOM1 ✕✕●✕✕✕✕✕✕✕✕✕
ELEC TOM2 ✕✕✕●✕✕✕✕✕✕✕✕
ELEC TOM3 ✕✕✕✕●✕✕✕✕✕✕✕
ELEC TOM4 ✕✕✕✕✕●✕✕✕✕✕✕
808 KICK ●✕✕✕✕✕✕✕✕✕✕✕
808 SNARE ✕●✕✕✕✕✕✕✕✕✕✕
808 TOM1 ✕✕●✕✕✕✕✕✕✕✕✕
808 TOM2 ✕✕✕●✕✕✕✕✕✕✕✕
808 TOM3 ✕✕✕✕●✕✕✕✕✕✕✕
808 TOM4 ✕✕✕✕✕●✕✕✕✕✕✕
909 KICK ●✕✕✕✕✕✕✕✕✕✕✕
909 SNARE ✕●✕✕✕✕✕✕✕✕✕✕
909 TOM1 ✕✕●✕✕✕✕✕✕✕✕✕
909 TOM2 ✕✕✕●✕✕✕✕✕✕✕✕
909 TOM3 ✕✕✕✕●✕✕✕✕✕✕✕
909 TOM4 ✕✕✕✕✕●✕✕✕✕✕✕
Other ▲▲▲▲▲▲▲▲▲▲▲▲
* On instruments with a group name that includes “ELEC”, “808”, or “909,” the combination of head and
rim cannot be modified.
VERY IMPORTANT: If you assign two different “V” sounds from the same instrument group, to the head
and rim, the choices made when editing (shell depth, head type etc.) will apply for both sounds. For the sound
assigned to the rim, the ONLY individual edit parameter available is head tuning.
Parameters that can be set independently for the head
and rim
[INST] parameters:
Pitch, Decay (except for “V-EDIT” sounds)
[STUDIO] parameters:
Amb Send Level (except for ELEC, 808 or 909 sounds)
[CONTROL ROOM] parameters:
MIXER/Volume, MIXER/Fx Send (except for ELEC, 808 or 909 sounds)
[INST]-[F4 (CTRL)]-[F4 (MIDI)] parameters:
TRIGGER to PATTERN, Gate Time, Note No.
[INST]-[F4 (CONTROL)]-[F3 (PATERN)] parameters:
TRIGGER to PATTERN
Instruments that can be used with each trigger
136