Roland TD-10 Drums User Manual


 
Sound Generator
Variable Drum Modeling
Maximum Polyphony
56 Voices
Instruments
Drum Instruments: 600
Backing Instruments: 54
Drum Kits
50
Drum Kit Chains
16 chains (32 steps per chain)
Instrument Parameters
Acoustic Drum: Shell material, Shell depth, Head type,
Head tuning, Muffling, Strainer adjust-
ment
Electronic Drum: Attack, Tone pitch, Noise pitch, Decay,
Noise tone balance, Pitch bend
TR-808, TR-909: Attack, Tune, Tone, Snappy, Decay
Others: Pitch, Decay
Studio Parameters
Studio types: 10
Room size, Wall type, Ambience mic position
Mic type, Mic position
Mixer Parameters
Volume, Pan, Output select
Compressor / Equalizer
Compressor x 10
2-band parametric equalizer x 10
3-band master equalizer
Effect Types
30 Reverb (14 types)
Delay (4 types)
Flanger Delay (2 types)
Phaser Delay (2 types)
Chorus Delay (2 types)
Pitch shift delay (2 types)
3D-Delay (2 types)
Flying 3D-Delay (2 types)
Note Number Map (Percussion Group)
4 Note Number Range: 22–93
Trigger Parameters
Trigger type (Scan time, Retrigger Cancel, Mask time,
Crosstalk)
Sensitivity, Threshold, Curve
Seqencer
Preset Patterns: 50, User Patterns: 50
Tracks: 4
Play Function: One shot, Loop, Tap
Resolution: 192 ticks per quarter note
Recording Method: Real-time
Metronome Parameters
Time Signature, Interval, Volume, Output select
(Master/Phones only)
Instruments: 16 (Voice counting, Click, Cowbell, etc.)
Tempo
20–260
Display
64x160 dots backlit graphic LCD
8-segment, 3-character LED
Sliders
6 Kick, Snare, Hi-Hat, Others, Backing, Click
Preview Button
1 (touch sensitive)
Connectors
Trigger Input jack (dual) x 12
Output jack x 8 (4 stereo pairs)
Phones jack
Monitor Mix In jack (Stereo)
Hi-Hat control jack
Footswitch jack (dual)
MIDI Connector (IN, OUT/THRU)
Expansion Board Slot
Memory Card Slot
Output Separation: 76 dB (min.)
(MASTER L -> DIRECT L, MASTER R -> DIRECT R):45 dB (min.)
(DIRECT L -> Other DIRECT L, DIRECT R -> Other DIRECT R): 45 dB (min.)
Nominal Output level
+4 dBu (Audio Output)
Output Impedance
330 ohms
Power Supply
AC 117 V, 230 V, 240 V
Power Consumption
18 W
Dimensions
305 (W) x 245 (D) x 90 (H) mm
12-1/16 (W) x 9-11/16 (D) x 3-9/16 (H) inches
Weight
2.3 kg / 5 lbs 2 oz
Accessories
Owners manual, AC cord, Screws (M5 x 12) x 4
Options
Wave & System Expansion Board (TDW-1)
Pad (PD-120, PD-100, PD-80R, PD-80, PD-9, PD-7, PD-6)
Cymbal (CY-15R, CY-14C, CY-12R/C, CY-12H, CY-6)
Kick Trigger (KD-120, KD-80, KD-7)
Hi-Hat Control Pedal (FD-7)
Drum Stand (MDS-10, MDS-8, MDS-7U, MDS-6)
Cymbal Mount (MDY-10U)
Pad Mount (MDH-10U)
Footswitch (BOSS: FS-5U)
Memory Card (M-512E)
Trigger MIDI Converter (TMC-6)
0dBu = 0.775Vrms
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior
notice.
Specifications TD-10: Percussion Sound Module
168