Filter
Top Products
■ Effect on/off
If you wish to compare your sounds “with” or “without” ambiance, individual compressors &
equalizers, or digital effects, here they can each be turned on/off for the entire kit.
fig.00-040
1
Press [KIT], and then press [F3 (FX SW)].
The following screen will appear:
fig.00-041
In this page, [F1]–[F4] act as on/off switches. For example, pressing [F1] will turn ambiance on/off.
AMBNCE (Ambience):The size of the room and the type of walls can be adjusted to modify the
sound.
COMP (Compressor): This is used to smooth volume peaks, preventing overload.
EQ (Equalizer): This adjusts the balance of the high, mid and low ranges.
EFFECT (Effect): This adds effects such as reverb or delay.
When these switches are turned off, effects will not apply, regardless of any other settings. Before using ambi-
ence or effects, make sure that these switches are turned on.
These settings can be made for each drum kit.
Press [EXIT] to return to the “DRUM KIT” display page.
1
NOTE
MEMO
For a better performance
41
Quick Start