Filter
Top Products
60
TASCAM DP-008EX
8 – Editing Tracks
SILENCE (part erase)
This erases the selected track between the IN and
OUT points. This has the same effect as recording
a silent signal between the IN and OUT points. This
operation does not change the track length.
The parameters that can be set are as follows.
•
SILENCE TRK (“1”–“8”, “1/2”, “3/4”, “5/6”, “7/8”, “1–8”)
•
IN/OUT
TIP
This function can be used to remove short noises,
for example.
CLONE TRACK (track duplication)
Using
CLONE TRACK
you can create a copy of
a single track, a track pair or a master track on a
different track (or tracks).
This copies the entire track, so the IN and OUT points
have no effect.
The parameters that can be set are as follows.
•
SOURCE TRK (“1”–“8”, “1/2”, “3/4”, “5/6”, “7/8”, “1–8”,
“MST”)
•
DESTINATION TRK
NOTE
If you choose the same track for both the
SOURCE
TRK
item and the
DESTINATION TRK
item and
press the F2 [EXEC] button, a
Same Track
pop-up
message appears and the operation is cancelled.
CLEAN OUT (track erase)
This completely erases the selected track. This erases
the entire track, so the IN and OUT points have no
effect.
The parameters that can be set are as follows.
•
CLEAN OUT TRK (“1”–“8”, “1/2”, “3/4”, “5/6”, “7/8”,
“1–8”)