Tascam DP-008ex Recording Equipment User Manual


 
84
TASCAM DP-008EX
15 – Message Lists
The following popup messages alert you to conditions that may arise while you are using the unit. Consult this
table if you see something you do not understand.
Messages Meaning and remedy
Battery Empty
The batteries have no remaining charge.
This appears when the batteries have no remaining charge.
Replace the batteries with new ones or use a TASCAM PS-P520 AC adapter (sold
separately).
Battery Low
The batteries have little remaining charge.
This appears if you try to start recording when the batteries are low.
Replace the batteries with new ones or use a TASCAM PS-P520 AC adapter (sold
separately).
Card Full
The SD card is full during recording.
Export or delete unneeded data to make room on the card or use a different SD card.
Empty Export Track
There is no recorded data for the export track.
This appears if you tried to export a track from the song that does not have any
recordings. (See “Track import and export” on page 79.)
Export tracks from songs with recordings.
File Not Found
The file cannot be found.
This appears if you try to restore a song when the FAT Partition does not have any backed
up songs. (See “Song backup and restoration” on page 77.)
I/O Too Short
The IN and OUT points are too close together.
This appears if you try to activate repeat playback mode when the IN and OUT points are
too close together. Make sure the IN and OUT points are at least 2 frames apart. (See “Using
repeat playback” on page 53.)
Import File Not
Found
The file you are trying to import cannot be found.
You are trying to import a WAV file from the FAT partition when there are no WAV files
there. (See “Importing to tracks” on page 79.)
Connect the unit to a PC and transfer some files to the FAT partition for import.
Import File Too
Large
The file you are trying to import is too large.
You are trying to import a WAV file from the FAT partition that is too large for the
remaining space on the partition. Free up some space on the (native) partion and try
again.
In Bounce Mode
The unit is in
BOUNCE
mode.
You tried to perform an action that cannot be done while in
BOUNCE
mode.
In Mixdown Mode
The unit is in
MIXDOWN
mode.
You tried to perform an action that cannot be done while in
MIXDOWN
mode.
In Master Mode
The unit is in
MASTERING
mode.
You tried to perform an action that cannot be done while in
MASTERING
mode.
In Punch Mode
The unit is in punch in/out mode.
You tried to use a function that is not allowed when punch in/out mode is active.
In Repeat Mode
The unit is in repeat playback mode.
You tried to perform an action that cannot be done while in Repeat mode.
Invalid Card
The SD card installed in the card slot is in a format that cannot be used by this unit.
Insert another SD card after turning the unit OFF or format the card (put in standby) by
opening the
MENU
, selecting
CARD
and then selecting
FORMAT
.