Filter
Top Products
<PAGE 4>
MONO/POLY MODE:
Use the MONO/POLY MODE∧ and ∨ buttons to select
the output mode.
PORTAMENTO:
Use the ON/OFF buttons to enable or disable the porta-
mento function. (Portamento is a continuous gliding move-
ment from one tone to another.)
• Use the ∧ and ∨ buttons to specify the portamento time.
• PORTAMENTO does not function for the POLY MODE.
BEND RANGE:
Use the BEND RANGE ∧ and ∨ buttons to specify the
PITCH BEND range (0 to 12). Increments are in semi-
tones.
The higher the number, the greater the change in pitch
when PITCH BEND data is received as MIDI data.
MODULATION SENSITIVITY:
Use the MOD. SENS ∧ and ∨ buttons to adjust the sen-
sitivity of the MODULATION (when MIDI data is recieved).
• Use the MSB ∧ and ∨ buttons (half-tone increments) and
the LSB ∧ and ∨ buttons to adjust the setting.
Mixer
Use the MIXER display to visually adjust the major settings of each part. Use this display to make broad, general changes to the
settings.
1. On the SOUND MENU display, select MIXER.
• The MIXER display consists of 5 pages. Use the PAGE
buttons to switch among the pages.
• Each time the OTHER PARTS/TR button is pressed, the
part that is displayed changes.
2. Adjust each parameter.
<PAGE 1/5>
SOUND:
Select SOUND. Use the buttons below the display to set
the sound for the corresponding part.
• The buttons in the panel can also be used to select the
sound.
PAN:
Select PAN. Use the buttons below the display to adjust
the stereo balance of the corresponding part (L64–CTR–
R63).
VOLUME:
Select VOLUME. Use the buttons below the display to
adjust the volume of the corresponding part (0 to 127).
• To mute a part, press both the corresponding balance
buttons as the same time. To cancel the mute, press either
balance button for the part.
<PAGE 2/5>
REVERB:
Select REVERB. Use the buttons below the display to set
the level of the REVERB for the corresponding part (0 to
127).
MULTI:
Select MULTI. Use the buttons below the display to set
the MULTI EFFECT to ON or OFF for each part.
MULTI DEPTH:
Select MULTI DEPTH. Use the buttons below the display
to adjust the depth of the MULTI EFFECT for the corre-
sponding part (0 to 127).
Sound
Part VII Sound
105
QQTG0665