Filter
Top Products
6. Press the OK button.
• For details about KEY SETTING, refer to page 87.
• For details about CHORD MODIFY CHANGE, refer to
page 88.
7. Select the part to record to.
• Press the button for PART 1 or PART 2.
• Recording begins as soon as the pad is selected.
• Two parts can be recorded (PAD 1–4).
• The display looks similar to the following.
• Refer to page 89 for detailed information about PART
SETTING.
8. Proceed to record.
• The recording procedure is the same as for the COM-
POSER. (Refer to page 85.)
• When played back by the AUTO PLAY CHORD, the
recorded phrase will be played in the specified chord.
• In the PLAY SETTING, if LOOP is set to OFF, LOOP
recording is not possible.
PLAY SETTING
Select a playback mode.
1. On the PAD RECORDING display, press the
PLAY SETTING button.
• The display looks similar to the following.
2. Use the START ∧ and ∨ buttons to select a
playback mode.
SYNCHRO:
During a rhythm performance, the phrase playback
begins in time with the beat.
INSTANT:
The phrase starts to play immediately when the pad
button is pressed, regardless of the rhythm.
3. Use the LOOP ∧ and ∨ buttons to enable or
disable loop playback.
ON:
Once the pad button is pressed, the phrase is
played back repeatedly until the STOP button is
pressed.
OFF:
The phrase is played back only once.
CHORD STEP RECORD
A chord progression can be stored in PAD 5 and PAD 6.
1. On the REALTIME RECORDING display,
press the CHORD STEP REC button.
• The display looks similar to the following.
2. Use the CURSOR buttons to move the cursor
to the position you wish to input.
• The cursor moves in 1/8-note increments.
3. Input the chord by playing it on the keyboard.
• The chord name is shown.
• Use the keys to the left of the specified keyboard split
point (except for PIANIST mode).
4. Press the OK button.
5. Repeat steps 2 to 4 to store the rest of the
chord progression.
• To delete a chord which has been input, move the cursor
to the specific chord and press the ERS button.
Piano Performance
Pads
Part III Piano Performance Pads (PR804)
60
QQTG0665