Filter
Top Products
MIDI Setting Load Option
Specify how MIDI data is handled when data is loaded from a disk.
1. On the CUSTOMIZE MENU display, select
MIDI SETTING LOAD OPTION.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select an item.
Load MIDI Parameters?
From Registration file:
Specify whether MIDI data is also loaded when panel data
is loaded (NO/YES).
From Sequencer Song:
Specify whether MIDI data is loaded or changed when
SEQUENCER data is loaded or when the SONG is
changed by the SEQUENCER SONG SELECT, SONG
COPY or TRACK ASSIGN (NO/YES).
• The MIDI settings are always stored at the start of each
recorded SEQUENCER SONG and when PANEL WRITE
is executed. In the initialized state, the MIDI settings are
not loaded even when the SONG is changed. However,
changing this setting to YES will cause the stored MIDI
settings to also load in these cases.
Use these settings when:
GM2 mode ON:
Specify how the MIDI settings of this instrument are af-
fected when GM2 is on.
• Select from INITIAL, (initialized settings), PRESET (MIDI
PRESETS), and KEEP (the settings do not change).
NX SOUND mode ON:
Specify how the MIDI settings of this instrument are af-
fected when NX SOUND is ON.
• Select from INITIAL, (initialized settings), PRESET (MIDI
PRESETS), and KEEP (the settings do not change).
3. Use the ∧ and ∨ buttons to change the setting.
4. Press the OK button.
Video Out Mode Setting (PR804)
Select the output mode for the VIDEO OUT terminal when viewing display images, such as SLIDE SHOW or lyrics, on your external
video monitor or TV.
1. On the CUSTOMIZE MENU display, select
VIDEO OUT MODE SETTING.
• The display looks similar to the following.
2. Select PAL or NTSC.
• This setting is kept even after the power is turned off.
Customize
Part XI Customize
124
QQTG0665