Filter
Top Products
About the display
A large-size display, easy to operate with excellent readability, is used for displaying various information such as the names of
the selected sounds and rhythms etc. and when setting the functions. Let’s take a look.
• The display illustrations shown in this User’s Manual are examples for the sake of clarification; the actual displays on your
instrument may differ from the illustrations.
Normal display (HOME PAGE)
This is the kind of information you see on the display during
a normal performance.
Volume balance
At the bottom half of the normal display, the volume balance
of each part is represented in a fader illustration and by a
number (0 to 127). You can use the balance buttons below
the display to adjust the volumes.
<Performance parts>
When setting the volume balance, press the upper button to
increase the volume and the lower button to decrease it.
• Hold a button down to scroll the volume quickly.
MUTE
To mute a part, press both the corresponding upper and lower
buttons at the same time.
• The volume display for a muted part is shown as “MUTE”.
• Pressing either balance button for a muted part will cancel
the mute function.
OTHER PARTS/TR button
If you press the OTHER PARTS/TR button, the display
changes to show the volumes of PART (PT) 1–16. You can
then adjust the volumes of these parts. These parts are active
when playing back a song disk or when this instrument is
connected to external MIDI equipment and is used as a multi-
timbre sound generator.
• When there are other parts or tracks to access, the OTHER
PARTS/TR indicator is lit.
RIGHT 1 part sound
LEFT part sound
Volume of each part
RIGHT 2 part sound
Tempo
Selected rhythm
(PR804)
RT: RIGHT APC: AUTO PLAY CHORD PADS: PIANO PERFORMANCE PADS (PR804)
METR: METRONOME
About the display
31
QQTG0665