Filter
Top Products
3. On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4. Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
5. Press the YES button.
• All the data for the selected pattern is erased.
6. Use the MEASURE ∧ and ∨ buttons to specify
the number of measures in your new rhythm
pattern (1 to 16).
7. Use the TIME SIGNATURE ∧ and ∨ buttons
to specify the meter of the pattern (1/4 to 8/4).
• When the settings for the MEASURE and TIME SIGNA-
TURE of the INTRO or ENDING patterns are changed,
the Maj and Min settings change at the same time.
8. Press the OK button.
KEY SETTING
Set the key and chord in which you wish the recorded pattern
to be played. If the recorded performance is played in a key
or chord different from this setting, the automatic accompani-
ment will not be able to distinguish the correct chord.
1. On the RECORDING display press the KEY
SETTING button.
• The display looks similar to the following.
2. Use the KEY ∧ and ∨ buttons to set the key.
Use the CHORD ∧ and ∨ buttons to set the
chord type (Maj/Min).
3. When you have finished making the settings,
press the EXIT button.
Recording procedure
1. In the START RECORDING area on the dis-
play, select the rhythm part you want to record
first.
BAS: BASS
AC1–5: ACCOMP 1–5
DR1, 2: DRUMS 1, 2
• The metronome sound starts and the display looks similar
to the following.
2. Adjust the tempo.
• The tempo is shown on the display as =.
• The tempo can be freely adjusted when you play back
the rhythm pattern, so record at the tempo which is easiest
for you to play.
3. Select the sound.
• For the DRUMS part, only sounds from the DRUM KITS
sound group can be selected.
• For the ACCOMP and BASS parts, select sounds from
groups other than the DIGITAL DRAWBAR sound groups.
(continued on the next page)
Composer
Part V Composer
87
QQTG0665