Filter
Top Products
44
Quick Guide
Using the Multi Mode
Simple Mixer functions
(Mixing Edit Mode)
The Mixing Edit mode lets you easily edit some basic
parameters with a graphic mixer-like layout that allows
you to check each part’s setting. This mode is useful for
changing parameters for each part even while song data
is being played back from a connected sequencer.
Simple mixing functions and basic parameters are
provided in the mode, such as selecting Voices, changing
effect settings and so on. If you want to edit a Multi in
greater detail, see the Multi Edit mode (page 45).
Press the [MULTI] button in the Multi Play mode. The
[MULTI] button LED changed from green to red,
indicating that the Mixing Edit mode is selected.
Select the desired Part with the Part/Element buttons
([1/5/9/13] – [4/8/12/16]).
Repeatedly pressing one of the buttons alternates
among the Part numbers. For example, pressing the [1/
5/9/13] button repeatedly calls up Parts 1, 5, 9 and 13
in order.
You can also step through the Parts in order by
simultaneously holding down the [SHIFT] button and
using the PART [
EE
EE
][
FF
FF
] buttons.
Select the desired display by using the PAGE [
EE
EE
][
FF
FF
]
buttons, then edit the parameters in each display.
The Mixing Edit mode has three edit displays: Voice,
Output, and Effect.
•Voice
From this display you can select a Voice for each
Part. Select a Voice Bank with the “BankMSB/
BankLSB” parameter and select the desired Voice
with the “VoiceNo.” parameter.
n By selecting the BankMSB/BankLSB parameter with the
cursor [ ][ ] buttons and using the data dial, you can
call up the Voice Banks listed below.
*For details about Plug-in Board Voices, refer to page 30.
•Output
From this display you can set the Pan and Volume
for each Part.
Select “Pan” or “Volume” with the cursor [ ][ ]
buttons and use the data dial to change the settings.
• Effect
From this display you can adjust the Reverb/Chorus
effect for each Part. You can also select the Parts to
which the Insertion Effect is applied.
For an application example showing how to use
effects, see page 47.
1
Enter the Mixing Edit mode.
2
Select the desired Part.
3
Select the desired display.
Normal Voice Drum Voice Plug-in Voice
Pr1-5: Preset
Banks
PD: Preset Drum Bank
Pp (Pp1-3): Plug-in
Preset Bank(s)
GM: GM Bank GD: GM Drum Bank
Pu1-3: Plug-in User
Banks
Us1-2: User Voice
Banks
UD: User Drum Bank
PB: Plug-in Board
Voice Bank*