Filter
Top Products
84
Appendix
Optional Plug-in Board Installation
6-2 Press down the other side until it is securely
settled on the hooks 2.
6-3 Put the cable into the MOTIF-RACK, making
sure that no part of the cable sticks out of the
instrument.
7 Replace the Plug-in board cover by fastening the six
flat-head screws you removed in the step 2 above.
Removing the Plug-in board from the
MOTIF-RACK
1 Press down the hooks 2 in the direction as shown
in the illustration and take the board out from the
hooks 2 by lifting up the one side.
2 Pull out the other side of the board from the
hooks 1 while pressing down hook 1 as shown in
the illustration.
3 Pull out the cable connector from the Plug-in
board connector.
P
L
G
2
P
L
G
2
hook 2
P
L
G
2
hook 2
P
L
G
2
hook 1