Filter
Top Products
54
Quick Guide
Using the Arpeggio function
Move the cursor to the “Type” parameter (use the
cursor [ ][ ] buttons) and select the Arpeggio type
with the data dial.
Move the cursor to the “Tempo” parameter (use the
cursor [ ][ ] buttons) and set the Arpeggio tempo
with the data dial.
Use the cursor [ ][ ] buttons to move to the desired
parameter (Note limit, Velocity limit, and so on) and
set it. For details about each parameter, refer to the
Reference section.
You can set Arpeggio playback on or off for each part.
This parameter can be set in the Multi Part Edit mode.
Enter the Multi Part Edit mode (page 46) and select the
“ArpSw” parameter in the “Voice” screen. Use the data
dial to turn the desired part on.
The Arpeggio settings can be stored with each Voice/
Multi. For details about storing Voices/Multis, see page
57.
3
Select an Arpeggio Type.
4
Set the Tempo for Arpeggio
playback.
5
Make other settings for the
Arpeggio as desired.
6
Set the Arpeggio part switch
(Multi only).
7
Store the Arpeggio settings.