Filter
Top Products
22 SPX2000—Owner’s Manual
You can select an ID number that will identify the
SPX2000 Editor. In order to allow communication with
the SPX2000 Editor, you must set this to the same ID num-
ber as you specified in the SPX2000 Editor.
1 Select the “EDITOR ID” function
Press the [UTILITY] button (L) several times to select
“EDITOR ID.”
2
Specify the ID number for use with the SPX2000
Editor
Use the [▲ INC]/[▼ DEC] buttons (G) to specify the
ID number for identifying the SPX2000 Editor. You can
select an ID number in the range of 1—8.
You can create a MIDI program change table to specify the
effect that will be recalled when the SPX2000 receives a
program change message.
The SPX2000 provides three tables (A—C), and each table
lets you make 128 effect assignments (a total of 384 assign-
ments).
1 Select the “MIDI PGM CHANGE” function
Press the [UTILITY] button (L) several times to select
“MIDI PGM CHANGE.”
2 Edit the MIDI program change table
Use the following buttons to select the Table (TBL A—
C), Program Change Number (PGM1—128), and
Effect (---, P01—U99
(*)
).
[BACK] button:
Moves the cursor toward the left.
[NEXT] button:
Moves the cursor toward the right.
[▲ INC] button:
Changes the character at the cursor location
(e.g., A→B→C, 1→2→3).
[▼ DEC] button:
Changes the character at the cursor location
(e.g., C→B→A, 3→2→1).
(*) This abbreviation indicates the bank and effect number; e.g.,
P01 is effect number 01 of the PRESET bank, C10 is effect
number 10 of the CLASSIC bank, and U05 is effect number 5
of the USER bank.
Selecting the ID number for use
with the SPX2000 Editor
EDITOR ID
1
EDITOR ID
1
Editing the MIDI program
change table
NOTE: If you specify “---” as the effect, no effect will be recalled
when the SPX2000 receives that program change message.
For example, suppose that you made the following settings in
Table A:
TABLE A: PGM107=P02
TABLE A: PGM108=---
TABLE A: PGM109=U05
When the SPX2000 receives the Table A:107 or 109 program
change messages, it will recall the corresponding effect.
However, nothing will be recalled when the Table A:108
message is received.
MIDI PGM CHANGE
TBL A:PGM 1=P01
Cursor
MIDI PGM CHANGE
TBL A:PGM 1=P01
Table Effect
Program Change Number