Filter
Top Products
SPX2000—Owner’s Manual 41
Delay
Effect list
The following tables show the default parameter values for the effect belonging to the Stereo Delay type (PRESET bank).
■Basic parameters
■Fine parameters
Modulation Delay (PRESET bank)
These effects modulate the delay sound.
Each aspect of the sound is controlled by the following effect parameters.
Delay sound: DELAY, FB.GAIN, HI.RATIO
Modulation signal: FREQ., DEPTH, WAVE
Tempo synchronization: SYNC, DLY.NOTE, MOD.NOTE, TEMPO
Filter/equalizer: HPF, LPF
Output level: OUT LVL, MIX BAL.
Parameter details
■Basic parameters
No. Effect name DELAY L DELAY R FB.G L FB.G R HI.RATIO
49 STEREO DELAY 250.0 ms 375.0 ms +44% +28% 0.6
No. Effect name MIX BAL. OUT LVL HPF LPF SYNC NOTE L NOTE R TEMPO
49 STEREO DELAY 100% 90% Thru 12.5 kHz OFF —
Parameter name Range Explanation
DELAY 0.0—2725.0 ms
Delay relative to the original sound.
FB.GAIN –99%—+99%
Amount of feedback for the delay sound. This indicates the ratio by which the level is reduced
when repeating the effect. For example with a setting of +50, the level of the delay sound will decay
to 50% → 25% → 12.5% as it is repeated. Negative (–) values invert the phase of the feedback.
HI.RATIO 0.1—1.0
Amount of feedback for the high-frequency portion of the delay sound. This is specified as a pro-
portion of FB.GAIN. If this value is 0.1, the feedback amount will be 1/10th of FB.GAIN; if this
value is 1.0, the feedback amount will be the same as FB.GAIN.
FREQ. 0.05—40.00 Hz
Speed of modulation. Increasing this value will cause the delay sound to be modulated in a shorter
cycle.
DEPTH 0—100%
Depth of modulation. Increasing this value will make the modulation deeper.
WAVE Sine, Tri
Waveform of the modulation signal. This will affect the character of the modulation.
You can choose Sine (sine wave) or Tri (triangle wave).
IN
HPF LPF
DELAY
with
Modulation
FB.GAIN
MIX
BAL.
OUT L
OUT R