Filter
Top Products
24 SPX2000—Owner’s Manual
Here’s how to return the SPX2000 to its factory-set condi-
tion.
1 Turn off the power
If the SPX2000 is powered-on, turn the power off.
2 Prepare for initialization
While holding down the [STORE] button (B), turn on
the power.
→ The following screen will appear.
3 Initialize
Press the [▲ INC] button (G) to initialize the
SPX2000.
If you decide not to initialize, press any button other
than [▲ INC].
Initializing the SPX2000
The following procedure will erase all effects in the
USER bank. If necessary, use the “BULK OUT (ALL)”
function to back up your data before you proceed.
Factory Preset?
PUSH INC