Filter
Top Products
82 SPX2000—Owner’s Manual
Other effects
The SPX2000 also provides an effect that lets you apply three different filters simultaneously, an effect that combines a com-
pressor, expander, and limiter to make your sound tighter and more finished, and guitar-type effects such as distortion and
amp simulator.
Multi Filter (PRESET bank)
This effect lets you simultaneously apply three different filters.
Filter 1: TYPE 1, FREQ. 1, RESO. 1
Filter 2: TYPE 2, FREQ. 2, RESO. 2
Filter 3: TYPE 3, FREQ. 3, RESO. 3
Output level: MIX BAL., LEVEL 1, LEVEL 2, LEVEL 3
Parameter details
■Basic parameters
■Fine parameters
Effect list
The following tables show the default parameter values for the effect belonging to the Multi Filter type (PRESET bank).
■Basic parameters
■Fine parameters
Type Bank
No. of
INs/OUTs
Page
Multi Filter
PRESET
2 IN/2 OUT
82
Multi-band Dynamics Processor 83
Rotary Speaker
1 IN/2 OUT
85
Distortion 86
Amp Simulator 87
Parameter name Range Explanation
TYPE 1
TYPE 2
TYPE 3
LPF, HPF, BPF
Filter type. Choose from LPF (Low Pass Filter), HPF (High Pass Filter), and BPF (Band Pass Filter).
FREQ.1
FREQ.2
FREQ.3
28.0 Hz—16.0 kHz
Filter frequency. The affected region will depend on the selected TYPE. If TYPE is LPF, frequency
components above this frequency will be cut. If TYPE is HPF, frequency components below this
frequency will be cut. If TYPE if BPF, frequency components in the region near this frequency will
pass through the filter more readily.
RESO.1
RESO.2
RESO.3
0—20
Resonance. This indicates the sharpness of the frequency response curve. This parameter is valid if
TYPE is set to BPF. Higher settings will sharpen the curve, narrowing the width of the filter.
Parameter name Range Explanation
MIX BAL. 0—100%
Balance between the original sound and effect sound. At a setting of 0% only the original sound
will be output; at a setting of 100% only the effect sound will be output.
LEVEL 1
LEVEL 2
LEVEL 3
0—100
Output level. LEVEL 1 is the output level of the Filter 1 region, LEVEL 2 is the output level of the
Filter 2 region, and LEVEL 3 is the output level of the Filter 3 region.
No. Effect name TYPE 1 FREQ. 1 RESO. 1 TYPE 2 FREQ. 2 RESO. 2 TYPE 3 FREQ. 3 RESO. 3
80 MULTI FILTER LPF 160 Hz 9 BPF 630 Hz 8 HPF 1.60 kHz 9
No. Effect name MIX BAL. LEVEL 1 LEVEL 2 LEVEL 3
80 MULTI FILTER 100% 100 100 65