106 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
Query Syntax :OPEE?
The :OPEE? query returns the current value contained in the Operation
Status Enable register as an integer number.
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 88
• ":AER (Arm Event Register)" on page 89
• ":CHANnel<n>:PROTection" on page 156
• ":EXTernal:PROTection" on page 178
• ":OPERegister[:EVENt] (Operation Status Event Register)" on page 109
• ":OVLenable (Overload Event Enable Register)" on page 111
• ":OVLRegister (Overload Event Register)" on page 113
• "*STB (Read Status Byte)" on page 81
• "*SRE (Service Request Enable)" on page 79
3 Run Running Event when the oscilloscope is running (not
stopped).
2-0 --- --- (Not used.)
Table 37 Operation Status Enable Register (OPEE) (continued)
Bit Name Description When Set (1 = High = True), Enables:
