A SERVICE OF

logo

Open as PDF
next previous
360 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3 Commands by Subsystem
:TRIGger:IIC:SOURce:DATA
(see page 530)
Command Syntax
:TRIGger:IIC:[SOURce:]DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:IIC:[SOURce:]DATA command sets the source for IIC serial
data (SDA).
Query Syntax
:TRIGger:IIC:[SOURce:]DATA?
The :TRIGger:IIC:[SOURce:]DATA? query returns the current source for IIC
serial data.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 313
• ":TRIGger:IIC:SOURce:CLOCk" on page 359