Filter
Top Products
Using the Step Sequencer
E-59
4.
Use the
bq
cursor (U, q, w, I) buttons to
move the brackets % or the cursor to the item
whose setting you want to change, and then
use the
bq
minus (–) and plus (+) buttons to
change the selected setting.
•Use
bl
PATTERN to change the pattern number.
• Use the
9
PART minus (–) and plus (+) buttons to
change the part name.
•Use
bk
STEP minus (–) and plus (+) buttons to
change the step number.
• To return to the previous menu level, press
bq
EXIT.
• The mixer screen shows current settings.
• While the Step Edit screen is displayed, the keyboard
will sound the tone of the currently selected part. The
mixer screen shows the settings of each step (the note,
velocity or value item that is currently being changed).
• On the mixer screen, notes are shown in a specific
position on the screen as C through B, regardless of the
actual octave.
In addition to the changes you can make using the simple
editing procedures (page E-51), you can also do the following.
• Copy settings from another slider
• Scale, drum, velocity slider presets
• Note shift
1.
Press
1
STEP SEQUENCER.
2.
Hold down
2
FUNC A/B until a screen like the
one shown below appears on the display.
3.
Press
bq
MENU.
4.
Use the
bq
cursor (U, q, w, I) buttons to
move the item selection cursor (0) to the item
you want and then press
bq
ENTER. The items
available on the screen are described below.
■ Copy: Copies settings from another slider.
Use the
bq
cursor (U, q, w, I) buttons to move the
brackets % to an item and then use the
bq
minus (–) and
plus (+) buttons to change the item’s setting.
• Chord parts can be copied between chord parts only.
• Data being edited (!TEMP) can be specified as a copy
source.
■ Preset: Scale, drum, velocity slider presets
Use the
bq
cursor (U, q, w, I) buttons to move the
brackets [ ] to an item and then use the
bq
minus (–) and
plus (+) buttons to change the item’s setting. Inputting a
slider preset number automatically causes the slide preset
name to change accordingly.
• The following shows the slider preset numbers and their
corresponding slider preset names.
1 Major, 2 Minor, 3 Dorian, 4 Lydian,
5 Mixolydn (Mixolydian), 6 Phrygian, 7 Locrian,
8 M.Minor (Melodic Minor), 9 H.Minor (Harmonic Minor),
10 H.M. 5th (Harmonic Minor 5th), 11 Altered (Altered),
12 WholeTon (Whole Tone), 13 Diminish (Diminished),
14 Pentaton (Pentatonic), 15 M.Penta (Minor Pentatonic),
16 Blues, 17 Kick (Bass Drum), 18 Snare, 19 Hi-hat,
20 Toms, 21 Cymbal, 22 Velocity
• The following are the chord part only slider preset numbers
and their slider preset names.
1 Diatonic, 2 Minor, 3 H.Minor (Harmonic Minor), 4 Velocity
Changing Slider Settings
To copy slider settings from another slider
FUNC A/B button setting
Copy destination pattern name
FUNC A/B button setting
PatternCopy source sequence number
Slider preset name
Pattern name FUNC A/B button setting
Slider preset number