Filter
Top Products
E-81
Reference
Error Messages
Display
Message
Cause Required Action
Format 1. The current memory card format is not compatible
with this Synthesizer.
1. Format the memory card on the Synthesizer (page
E-75).
2. The memory card capacity is greater than 32GB. 2.Use a memory card with a capacity of 32GB or
less.
3. You are trying to use an SDXC card. 3. SDXC cards not supported. Use an SD or SDHC
memory card.
4. There is something wrong with the memory card. 4. Use a different memory card.
Card Full There is not enough room available on the memory
card.
Delete some of the files on the memory card to make
room for new data (page E-78), or use a different
card.
Card R/W Memory card data is corrupted. Use a different memory card.
No Card 1.The memory card is not loaded correctly in the
Synthesizer’s card slot.
1. Correctly load the memory card into the card slot.
2. The memory card was removed while some
operation was in progress.
2. Do not remove the memory card while any
operation is in progress.
No Data You tried to save a Synthesizer user area (user
rhythm, user rhythm song, etc.) that does not contain
any data to the memory card.
Select a user area that contains data.
No File 1. There is no MUSICDAT folder (page E-77) on the
memory card.
1. Create a MUSICDAT folder on the memory card or
format the memory card on the Synthesizer (page
E-75).
2. There is no loadable or playable data in the
MUSICDAT folder.
2. Move the file you want to load or play into the
memory card’s MUSICDAT folder.
Not SMF0/1 You are attempting to play back SMF Format 2 file. This Synthesizer supports playback of SMF Format 0
or Format 1 only.
Protect The memory card is write-protected. Use the memory card’s write protect switch to enable
writing.
Read Only A read-only file with the same name you are trying to
use is already stored on the memory card.
• Use a different name to save the new file.
• Remove the read-only attribute from the existing
file and overwrite it with the new file.
• Use a different memory card.
Size Over 1. The data on the memory card is too big to play. 1. This Synthesizer supports playback of song data
files with a maximum size of about 320KB.
2. The data you are trying to load is too large. 2.The following is the approximate maximum data
sizes (per data item) when loading data into
Synthesizer memory.
User phrase: 8KB
A total of approximately 128KB of user phrase
(total of all 100 user presets) can be loaded.
3. Chain SMF data size is too large to convert the
data and save it to a card.
3. The Synthesizer can convert up to 320KB of chain
SMF data and save it to a card.
Wrong Data 1. The memory card data is corrupted. Use a different memory card.
2. The memory card contains data that is not
supported by this Synthesizer.
Memory Full There is not enough memory capacity required for
phrase sequencer operations.
Shorten the phrase so it takes up less memory space.