Filter
Top Products
Other Useful Functions
E-70
1.
Press
7
SETTING.
2.
Use the
bq
down (w) button to select
“MIDI >Ent” and then press
bq
ENTER.
3.
Use the
bq
cursor (U, q, w, I) buttons to
select the item you want, and then use the
bo
dial or
bq
minus (–) and plus (+) buttons to
change its setting.
Setting Item
* To apply setting changes, turn the Synthesizer off and then
back on again. A message to that effect appears on the
display whenever you exit a setting screen.
4.
After settings are the way you want, press
7
SETTING to exit the setting screen.
• You can also use performance data editing to change the
MIDI data send channel and configure other settings. For
more information, see the “MIDI >Ent” group (page E-66).
MIDI Settings
Display Description Settings
Device ID
Device ID. Selects the ID number of
the Synthesizer for MIDI system
exclusive message send/receive.
• While “All” is selected, a system
exclusive message is sent
regardless of the ID number.
• For details about the ID number,
see MIDI Implementation at
http://world.casio.com/.
1 to 16, ALL
Basic Ch
Basic channel. Specifies the receive
channel of “Perform NRPN”, “S.Seq
NRPN”, and other MIDI messages
described below.
1 to 16
MIDIOutSel
MIDI OUT select. Specifies what is
output as MIDI OUT.*
KEY (Keyboard): Synthesizer
keyboard play, operations, etc.
MIDI (MIDI IN): Messages input via
bt
MIDI IN (MIDI THRU)
USB (USB IN): Messages input via
bt
USB
Refer to the
cell to the
left.
USBOutSel
USB out select. Specifies what is
output as USB out.*
KEY (Keyboard): Keyboard and
other Synthesizer operations.
MIDI (MIDI IN): Messages input via
bt
MIDI IN
Refer to the
cell to the
left.
MIDI In
MIDI IN on/off (MIDI IN enable).
While this setting is turned on,
messages input via
bt
MIDI IN are
reflected by the Synthesizer’s
internal sound source.
Off, On
USB In
USB IN on/off (USB IN enable).
While this setting is turned on,
messages input via
bt
USB are
reflected by the Synthesizer’s
internal sound source.
Off, On
Sync Mode
Sync mode. Settings for MIDI
syncing between the Synthesizer
and an external device.*
Off: No syncing
Mast (Master): Outputs Clock, Start/
Stop (Step Sequencer), and other
signals from the Sequencer to
control an external device.
Slav (Slave): Receives Clock, Start/
Stop, and other signals from an
external device.
• Step Sequencer and Phrase
Sequencer playback is not
possible unless Clock is received.
Start/Stop is interpreted as Step
Sequencer start/stop.
Refer to the
cell to the
left.
Perform NRPN
Performance NRPN change.
When this setting is turned on, a
Synthesizer performance (page
E-63) can be selected by a MIDI
NRPN message from an external
device.
Off, On
S.Seq NRPN
Step Sequencer NRPN change.
When this setting is turned on, a
Synthesizer sequence (page E-51)
can be selected by a MIDI NRPN
message from an external device.
Off, On
Phrase NRPN
Phrase NRPN change. When this
setting is turned on, a Synthesizer
phrase (page E-44) can be selected
by a MIDI NRPN message from an
external device.
Off, On
Arp NRPN
Arpeggio NRPN change. When this
setting is turned on, a Synthesizer
arpeggio type (page E-40) can be
selected by a MIDI NRPN message
from an external device.
Off, On
Display Description Settings