Filter
Top Products
Other Useful Functions
E-71
Use the procedure below to delete user tones, user
sequences, and other data that you created, and return
memory to its initial factory default status.
1.
Referring to the table in step 2 of the procedure
under “To save Synthesizer data to a memory
card” (page E-75), perform the procedure
required for the type of data you want to delete.
2.
Use the
bq
up (q) and down (w) buttons to
move the item selection cursor (0) to “Clear
USER” and then press
bq
ENTER.
• This causes a menu screen like the one shown below
to appear on the display. The sample screen below
shows the screen that appears when you perform this
procedure from the Step Sequencer Mode.
• In the case of the Phrase Sequencer, the phrase data
size is also displayed.
3.
Use the
bo
dial or
bq
minus (–) and plus (+)
buttons to select the user data you want to
delete.
4.
Press the
bq
ENTER button.
5.
In response to the “Sure?” message that
appears, press the
bq
YES button to delete or
the
bq
NO button to cancel.
You can use the procedure below to initialize Synthesizer
global settings and data, and return them to their initial factory
defaults.
1.
Press
7
SETTING.
2.
Press
bq
ENTER.
3.
Use the
bq
cursor (U, q, w, I) buttons to
select “Initialize >Ent” and then press
bq
(ENTER).
This will display the INITIALIZE screen.
4.
Use the
bq
up (q) and down (w) buttons to
select the initialization option you want.
Initialization Options
5.
Press
bq
ENTER.
This should cause “Sure?” to appear on the display.
6.
Press
bq
YES.
The message “Complete!” will appear on the display when
delete is complete.
7.
Press
7
SETTING to exit the setting screen.
Deleting Data Saved on the
Synthesizer
Initializing Synthesizer Global
Settings and Data
Display Description
Parameter >Ent Parameters only. Initializes all Synthesizer
settings except for display contrast (E-69).
All >Ent All settings and data. Initializes all Synthesizer
global settings and data, and return them to their
initial factory defaults.