2:1 OSC 1 (10: Brass Model)
2–1d: Bell Character
Tone [0…99]
Specifies the tone of the bell. As this value is increased, the low frequency portion will disappear, producing a
less solid tone.
Resonance [0…99]
Specifies the level at which the frequency region in the area of the “Tone” will be boosted. As this value is
increased, the resonance effect will become stronger.
2–1e: Peaking EQ
Frequency [0…49]
Specifies the center frequency of the frequency range that will be boosted or attenuated by the Peaking EQ.
Increasing this value will raise the center frequency.
Q [0…29]
Specifies the width of the Peaking EQ frequency band. Increasing this value will narrow the frequency band
that is boosted or attenuated.
Gain [–18…+18]
Specifies the amount by which the area specified by “Frequency” and “Q” will be boosted or attenuated.