Filter
Top Products
Program Edit P5
This section provides four general purpose EGs (envelope generators). The four EGs can be used as
modulation sources for the parameters of other sections to create time-variant change in the sound.
5–1: EG 1
5–1a: Level
Start (Start Level) [–99…+99]
Specifies the value at the time of note-on.
Attack (Attack Level) [–99…+99]
Specifies the value that will be reached after the Attack Time has elapsed.
Break (Break Level) [–99…+99]
Specifies the value that will be reached after the Decay Time has elapsed.
Sustain (Sustain Level) [–99…+99]
Specifies the value that will be reached after the Slope Time has elapsed.
Release (Release Level) [–99…+99]
Specifies the value that will be reached after the Release Time has elapsed.
5–1b: Time (Amp EG Time)
Attack (Attack Time) [0…99]
Specifies the time from note-on (when a note is played) until the value reaches the attack level. With a value of
0, the value will change instantly. With a value of 99, the value will change slowly.
5-1: EG 1
Parameters
Prog.
Edit
P5
Note-off
Attack level
Sustain level
Note-on
Attack
time
Decay
time
Slope
time
Release
time
Time
Break
level
0
-99
+99
5–1a
5–1b
5–1c
5–1d
5–1e
AMSource