Filter
Top Products
KTr (Damp Keyboard Track) [–99…+99]
Specifies how the Damp amount will be affected by the keyboard location.
With positive (+) settings, the Damp value will increase as you play notes above C4. With negative (–) settings, the Damp
will decrease as you play notes above C4.
AMS (Alternate Modulation Source) [OFF…MIDI (CC#83)]
Selects a modulation source (
☞
page 64 of this manual) that will control “Damp.”
Intensity (Damp AMS Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS” will have.
Decay [0…99]
Specifies the decay time over which the sound will decay if you continue pressing a note. Higher settings of
this value will produce a longer decay time.
Depending on the settings of “4-2: Amp EG”, the setting you make here may not have audible results. If you
raise the EG break level and sustain level, it will be easier to hear the result of this setting.
KTr (Decay Keyboard Track) [–99…+99]
Specifies how the Decay amount will be affected by the keyboard location.
With positive (+) settings, the decay will become faster as you play notes above C4. With negative (–) settings, it will become
slower.
Release [0…99]
Specifies the length of time over which the sound will decay after you release the note. Higher settings of this
value will produce a longer release time.
Depending on the settings of “4-2: Amp EG”, the setting you make here may not have audible results. You
may need to raise the EG release level, it will be easier to hear the result of this setting.
2:1 OSC 1 (12: Plucked String Model)
when Damp=50
when Damp=75
when Damp=25
C-1 C4 C9
99
0
50
C-1
C4
C9
99
0
75
C-1 C4 C9
99
0
25
+99 +50
0
-99
-50
+99+50
0
-50
-99
+99
+50
-50
-99
0
Damp
Damp
Damp
when Decay=50 when Decay=75when Decay=25
C-1 C4 C9
99
0
50
C-1
C4
C9
99
0
75
C-1 C4 C9
99
0
25
+99 +50
0
-99
-50
+99+50
0
-50
-99
+99
+50
-50
-99
0
Decay
Decay
Decay