Filter
Top Products
24
Performing
Adding Reverberation (Reverb Eect)
You can add a pleasant reverberation to the sounds you play from the keyboard, creating the impression that you are performing in a concert hall.
This is called the “reverb eect.”
1. Press the [REVERB] button.
The [REVERB] button will light.
If you press the [REVERB] button once again, the button will go out and the reverb eect will be cancelled.
Changing the Depth of the Reverb Eect
1. Hold down the [REVERB] button and press the [-] or [+] button.
The display will indicate the reverb depth setting.
Higher values produce deeper reverb.
Reverb depth range 1–10
MEMO
The modied setting will return to its original value when you turn o the power.
If desired, you can have the setting be retained even while the power is turned o (p. 49).
* The reverb depth cannot be set individually for each tone. The same depth of reverb is applied to each tone.
* The reverb depth for a song being played back will not change.
What are eects?
In addition to reverb, the FP-7F provides various other eects that can modify the sound.
An eect suitable for each tone will be selected.
* For some tones, no eect is applied.