Filter
Top Products
78
Connections with Other Equipment
Formatting Memory (Format Media)
This operation will erase the entire contents of internal memory or USB
memory.
* Please be aware that everything stored in internal memory or USB
memory will be erased when you format it.
* Before using a new USB memory with the FP-7F for the rst time,
you must format the USB memory.
1. Enter Function mode, and choose “File Menu” (p. 64).
2. Press the [PIANO] button.
3. Use the [-] [+] buttons to select “Format Media.”
4. Press the [PIANO] button.
5. Use the [-] [+] buttons to choose the memory that you want
to format.
Indication Setting
Internal Memory Internal memory
External Memory USB memory
6. Press the [PIANO] button.
A conrmation message will appear.
If you decide not to proceed with the format, press the TEMPO [-]
button.
7. Press the TEMPO [+] button.
All contents of the selected memory will be erased.
* Never turn o the power while the display indicates “Executing...”
* Even if you format the internal memory, settings not associated
with internal memory will not be initialized. If you want to return
the other settings (those that are not included in the contents of
internal memory) to their factory-set state, execute the Factory
Reset operation (p. 75).
* Do not disconnect the USB memory while USB memory is being
formatted.
Switching the External Memory Setting
(Ext. Memory Mode)
In some cases when USB memory is connected to the external
memory connector, it may take an excessive length of time for data to
be read, or data might not be read successfully. If this occurs, you may
be able to solve the problem by switching the external memory mode
setting.
1. Enter Function mode and choose “Ext. Memory Mode” (p. 64).
2. Press the [PIANO] button.
3. Use the [-] [+] buttons to choose the mode.
Setting Mode 1, Mode 2
4. Turn the power o, then on again (p. 14).
MEMO
This setting is remembered even while the power is turned o.
Playing Back Songs From External Media
Here’s how to play back songs from external media (CD/USB memory).
1. Connect external media that contains songs.
2. Press the [DISPLAY] button a number of times to access the
SONG screen.
3. Select the song that you want to play.
Refer to “Selecting a song,” below.
4. Press the SONG [PLAY/STOP] button.
For details on operations during playback, refer to “Playing the song”
(p. 41).