Filter
Top Products
70
Detailed Settings for Various Functions
Copying a Registration Set (Copy Regist. Set)
Registration sets you saved in internal memory can be copied to USB
memory.
Conversely, registration sets you saved on USB memory can also be
copied to internal memory.
1. Enter Function mode and choose “Registration” (p. 64).
2. Press the [PIANO] button.
3. Use the [-] [+] buttons to choose “Copy Regist. Set”
* You won’t be able to execute the following steps if there is no
registration set saved in internal memory, or if no USB memory is
connected.
4. Press the [PIANO] button.
5. Use the [-] [+] buttons to select the copy-source media.
Indication Explanation
Internal Memory Internal memory
External Memory USB memory
6. Press the [PIANO] button.
7. Use the [-] [+] buttons to select a registration set that you
want to copy.
If you select “All,” all registration sets will be copied.
8. Press the [PIANO] button.
9. Use the [-] [+] buttons to select the copy-destination
number.
If you select a number in which a registration set has already been
saved, then execute the copy, the previously saved registration set will
be deleted. If you don’t want to delete the saved registration set, select
a number for which “Not Used” is shown, then carry out the copy.
You won’t be able to execute the copy if the save-destination memory
is full. Delete unneeded data before you execute the copy.
10. Press the [PIANO] button.
The registration set will be copied.
* Never turn o the power while the display indicates “Executing...”
Using a Pedal to Switch Registrations
(Pedal Shift)
You can assign a pedal to successively switch registrations. Each time
you press the pedal, you will switch to the next registration.
Setting Explanation
O
Pressing a pedal connected to the
SOSTENUTO/C (FC2) jack or SOFT/L (FC1) jack
will not switch registrations. The functions
assigned to the SOSTENUTO/C (FC2) jack and
SOFT/L (FC1) jack will be available for use (p. 73).
FC 1
The pedal connected to the SOFT/L (FC1) jack
can be used only for switching registrations. In
this case, the function assigned to the SOFT/L
(FC1) jack cannot be used.
FC 2
The pedal connected to the SOSTENUTO/C (FC2)
jack can be used only for switching registrations.
In this case, the function assigned to the
SOSTENUTO/C (FC2) jack cannot be used.