Filter
Top Products
26
Performing
Playing Two Tones Layered (Dual Play)
You can play two tones simultaneously from a single key. This is called “Dual Play.”
As an example, here’s how to layer piano and strings tones.
1. Hold down the [PIANO] button and press the [STRINGS/PAD] button.
Both buttons will light.
When you play the keyboard, you’ll hear the piano and strings tones layered.
Tone 1
Tone 2
When you press any TONE button, Dual Play will be cancelled, and only the sound of the button you pressed will be heard.
* You can’t use Dual Play simultaneously with Split Play.
About the tones
Tone name Corresponding button How to select a tone
Tone 1 TONE button at the left Press the [-] or [+] button.
Tone 2 TONE button at the right Hold down the tone 2 button (the lit TONE button at the right) and press the [-] or [+] button.
* For some combinations of tones, the eect will not be applied to tone 2, causing it to sound dierently.
MEMO
• You can adjust the volume balance of the two tones (p. 72).
• You can shift the pitch of tone 2 in steps of an octave (p. 72).
• When you press the damper pedal while using Dual Play, the eect will be applied to both tone 1 and tone 2. If desired, you can have the
eect be applied to only one of the tones (p. 72).