Filter
Top Products
56
Changing the way in which a loop plays (Loop Control)
Saving your loop control settings
If you want to preserve the loop control settings, save the pattern/effect
pattern that contains them.
* The settings you make will be lost if you select another loop control pattern or turn
off the power before saving.
* The Save operation cannot be performed while a pattern or effect pattern is playing.
1
Press the [WRITE] button.
The pattern/effect pattern number in the display will blink.
2
Use the [INC] and [DEC] buttons to select the save-destination
pattern/effect pattern number.
Select U01–U20 to save your data in internal memory, or C01–C50 to save
your data on a memory card.
* Since the data you save will overwrite any previous data at that location, the
previous data will be lost. Make sure that the selected number does not contain a
pattern you want to keep.
3
Press the [WRITE] button to execute.
The display will indicate “Sur”, asking you to confirm the operation.
4
Press the [WRITE] button to write.
While a pattern/effect pattern is being saved, the display will show “bsy”.
When the data has been saved, you will return to the screen in which you
were prior to beginning the Save process.
If you decide not to save the pattern/effect pattern, press the [EXIT] button.
You can save 20 patterns
(total for LEAD, BASS,
RHYTHM, and EFFECTS
groups) in internal
memory.