Filter
Top Products
173
Chapter 6 Creating Rhythm Sets
Chap.6
RHYTHM WG Pitch page ([RHYTHM] -
[F2 (WG)] - [F2 (Pitch)])
fig.06-008.e_70
Pitch (Rhythm Tone Pitch)
Coarse Tune (Rhythm Tone Coarse Tune)
Range: C-1–G9
Adjusts the pitch of the Tones in semitone steps over a range
of +/-4 octaves.
Fine Tune (Rhythm Tone Fine Tune)
Range: -50– +50
Adjusts the pitch of the Tone in one-cent steps (1/100th of a
semitone) over a range of half a semitone up or down.
Random Pitch (Rhythm Tone Random
Pitch)
Depth (Rhythm Tone Random Pitch Depth)
Range: 0–1200
Specifies the width of random pitch deviation that will occur
each time a key is pressed. If you do not want a random pitch
change, set this parameter to 0. The setting is adjustable in
units of 1 cent (1/100th of a semitone).
RHYTHM WG Pitch Envelope page
([RHYTHM] - [F2 (WG)] - [F3 (Pch Env)])
fig.06-009.e_70
Pitch Envelope
These parameters determine the amount of pitch enveloping
— changes to your basic pitch settings that occur over time
— the effect of velocity on the pitch envelope, and the basic
characteristics of the pitch envelope itself.
fig.06-010.e
Depth (Pitch Envelope Depth)
Range: -12– +12
Determines the amount of pitch enveloping to be used.
Higher values will cause greater change. Negative (-) settings
invert the direction of the changes made by the Pitch
Envelope.
Time1–4 (Pitch Envelope Time 1–4)
Range: 0–127
Determine the times over which the basic pitch settings will
change from one pitch envelope level (L1–L4) to the next.
Level 0–4 (Pitch Envelope Level 0–4)
Range: -63– +63
Each pitch envelope level value determines an amount of
change to be applied to the Tone’s basic pitch.
Velocity Sens (Pitch Envelope Velocity
Sensitivity)
Amount (Pitch Envelope Time Amount
Sensitivity)
Range: -63– +63
Adjust this parameter when you want your keyboard
playing dynamics (velocity) to affect the amount of pitch
enveloping. For higher settings, there will be a greater
difference between softly and strongly played notes.
Negative (-) values invert the change.
Time1 (Pitch Envelope Time 1 Velocity
Sensitivity)
Range: -63– +63
Use this parameter when you want keyboard playing
dynamics (velocity) to affect T1 (Time 1) of the pitch
envelope. For higher settings, there will be a greater
difference between softly and strongly played notes. With
positive (+) settings, greater keyboard velocity will reduce
the T1 setting. With negative (-) settings, greater keyboard
velocity will increase the T1 setting.
T1 T2 T3 T4
L3
L4
L2
L1
L0
Pitch
key is
pressed
key is
released
Time