Filter
Top Products
228
Chapter 10 Examples of Applications Using the XV-5080
GM Effects Reverb page ([F5 (Effects)] -
[F3 (Reverb)])
GM mode reverb settings are made here.
In GM mode, the reverb effect settings for the GM Patch
assigned to each Part will be ignored (except for the Send
Level parameter).
fig.10-010.e_70
Type (Reverb Type)
Selects the type of Reverb.
Available Settings:
SMALL ROOM: Reverb obtained in a small sized room.
MEDIUM ROOM: Reverb obtained in a somewhat larger
room.
LARGE ROOM: Large room reverb.
MEDIUM HALL: Reverb sound found in a medium sized
concert hall.
LARGE HALL: Reverb sound found in a large concert hall.
PLATE: Plate reverb effect
Time (Reverb Time)
Range: 0–127
Adjusts the time over which the reverberation will continue.
Checking MIDI Information for Each
Part ([F6 (Info)])
In this screen, you can check the reception status of the
various types of MIDI messages, on an individual Part basis.
This is a convenient way to check that the sound generator is
responding correctly to messages from a keyboard or
external MIDI controllers.
* Use [ ] or [ ] to select a display page.
Mod (Modulation Information)
Breath (Breath Information)
Foot (Foot Information)
Vol (Volume Information)
Pan (Pan Information)
Exp (Expression Information)
Hold (Hold 1 Information)
Bend (Pitch Bend Information)
Aftertouch (Aftertouch Information)
Voices (Voice Information)
Utility Functions in GM Mode
In the GM mode, you can initialize GM mode, and transmit
GM mode settings, using the Utility functions.
Setting Procedure:
1. In GM mode, press [SYSTEM/UTILITY], getting the
indicator to light.
The unit should now be in Utility mode.
2. Press [F6 (Menu)] to select the function.
3. Press F button.
4. Press [SYSTEm/UTILITY] to return to the GM PLAY
page.
The functions of the UTIL 2 group can also be executed from
GM mode. The operation is the same as in other modes.
Press [] or [] until the desired function is blinking, then press
[ENTER].
The page for the function you’ve selected will appear.
Set parameters as necessary on each function’s page.
To cancel the operation, press [EXIT]. To return to the GM
PLAY page, press [UTILITY], extinguishing the indicator.
Press [ENTER] to execute the function.
Once the write operation is finished, “COMPLETED” will
momentarily appear in the display, then you’re returned to
the GM PLAY page.