Filter
Top Products
226
Chapter 10 Examples of Applications Using the XV-5080
Key Mode
Mono/Poly (Part Mono/Poly)
Range: MONO/POLY
Specifies whether the Part will play polyphonically (POLY)
or monophonically (MONO). The MONO setting is effective
when playing a solo instrument Patch such as sax or flute.
Portament (Portamento)
Switch (Portamento Switch)
Specifies whether the portamento effect will be applied (ON)
or not (OFF).
Time (Portamento Time)
Range: 0–127
When portamento is used, this specifies the time over which
the pitch will change. Higher settings will cause the pitch
change to the next note to take more time.
The Patch Selection/Volume/Pan/Pitch
Settings ([F3 (Part)])
fig.10-006.e_70
Patch (Part Patch)
You can select the Patch or Rhythm Set that will be assigned
to each Part.
Type
Range: PATCH/RHYTHM
Selects the Patch (PATCH) or Rhythm Set (RHYTHM) the
Part will play.
Number
Specifies the number of the Patches (1–256) or Rhythm Set
(1–4) that is assigned to each Part.
Level&Pan
Sets the volume and pan for each Part.
Part Volume
Range: 0–127
Sets the volume of the Part.
Part Pan
Range: RANDOM/L63–63R
Specifies the stereo location of the sound of each Part. L63 is
far left, 0 is center, and 63R is far right.
* If you modify the settings for Part Volume or Part Pan, they
will be reflected in the Part Information page.
Tune
Sets the pitch for each Part.
Coarse (Coarse Tune)
Range: -48– +48
Adjusts the pitch of the Part’s sound up or down in semitone
steps over a range of +/-4 octaves.
Fine (Fine Tune)
Range: -50– +50
Makes fine adjustments in 1-cent steps to the pitch specified
in Coarse Tune.
One cent is 1/100th of a semitone.
Bend Range
Value
Range: 0–24
Sets the amount of pitch change that will occur when you
move the Pitch Bend lever.
The amount of change when the lever is tilted is set to the
same value for both left and right sides.