Filter
Top Products
212
Chapter 9 Other Settings/Status Checks
Setting the MIDI Channel
The XV-5080 produces sound, and can change its internal
settings in response to MIDI messages that it receives from
other devices. In order for this to occur, the MIDI
transmission channels of the external device must match the
MIDI reception channels of the XV-5080.
MIDI Receive Ch (MIDI Receive
Channel)
Perf Ctl Ch (Performance Control Channel)
When changing Performances by MIDI messages from the
external device, set the transmit channel of the external
device and this channel to the same channel.
* When you perform a Factory Reset operation, Perform Ctrl Ch
is reset to “16.”
Patch/Rhy Rx Ch (Patch/Rhythm Set Receive
Channel)
Set this channel to use an external MIDI device (such as a
MIDI keyboard) for playing Patches and Rhythm Sets, or to
have Patches or Rhythm Sets changed as the result of MIDI
messages.
Setting the MIDI Transmit/
Receive Switch
MIDI Tx (MIDI Transmit)
Edit Data (Transmit Edit Data Switch)
When Patch, Performance or Rhythm Set settings are
modified, you can specify whether the modified settings will
be transmitted as System Exclusive data (ON), or not (OFF).
Rx Switch (Receive Switch)
Program Chg (Receive Program Change
Switch)
Specifies whether Program Change messages will be
received (ON), or not (OFF).
Bank Select (Receive Bank Select Switch)
Specifies whether Bank Select messages will be received
(ON), or not (OFF).
GM System ON (Receive GM-ON Exclusive
Switch)
Specifies whether GM-ON (General MIDI System On)
messages will be received (ON), or not (OFF).
GM2 System ON (Receive GM2-ON Exclusive
Switch)
Specifies whether GM Level2-ON (General MIDI Level 2
System On) messages will be received (ON), or not (OFF).
GS Reset (Receive GS Reset Exclusive Switch)
This specifies whether GS Reset messages will be received
(ON), or not (OFF).
Making the System Exclusive
Settings
System Exclusive
Device ID (Device ID Number)
Range: 17–32
When transmitting or receiving System Exclusive messages,
set this parameter to match the device ID number of the other
MIDI device.
Receive Sw (Receive System Exclusive Switch)
Specifies whether System Exclusive messages will be
received (ON), or not (OFF).
Specifying the Reception Status
for Each Tone
You can enable or disable the response to received MIDI
messages for each Part of a Performance, each Tone of a
Patch, and each Rhythm Tone of a Rhythm Set.
For more information about setting the MIDI response of
Parts in a Performance, check out “Establishing a Part’s MIDI
Settings (MIDI) (p. 164).”
For more information about the settings for a Patch, refer to
“MIDI Rx Switch (MIDI Receive Switch)” (p. 147).
For more about setting the MIDI response of Rhythm Tones
in a Rhythm Set, refer to “Other Settings (CONTROL)/Rx
MIDI (Receive MIDI)” (p. 179).