Filter
Top Products
85
Chapter 2 Using the XV-5080 Effects
Chap.2
High (High Gain)
Adjusts the gain of the high frequency range.
Positive (+) settings will emphasize (boost) the high-
frequency range.
Balance
Balance (Effect Balance) #
Sets the volume balance between the direct sound and the
effect sound.
With a setting of D100:0W only the direct sound will be
output, and with a setting of D0:100W the effect sound will
be output.
Output
Out (Output Mode)
Specifies the method that will be used to reproduce the
sound that is output to the OUTPUT jacks. The optimal 3D
effect will be achieved if you select SPEAKER when using
speakers, or PHONES when using headphones.
Level (Output Level)
Adjusts the output level.
71: ROTARY 2
This type provides modified response for the rotary speaker,
with the low end boosted further.
This effect features the same specifications as the VK-7’s
built-in rotary speaker.
fig.02-071m.e
Rotary
Speed #
Switches the rotational speed of the rotating speaker.
SLOW: The woofer rotates at the speed determined by the
Woofer Speed Slow setting, and the tweeter rotates at the
speed determined by the Tweeter Speed Slow setting.
FAST: The woofer rotates at the speed determined by the
Woofer Speed Fast setting, and the tweeter rotates at the
speed determined by the Tweeter Speed Fast setting.
Brake #
Switches the rotation of the rotary speaker.
When this is turned off, the rotation will gradually stop.
When it is turned on, the rotation will gradually resume.
Spread
Value
Sets the rotary speaker stereo image. The higher the value
set, the wider the sound is spread out.
Woofer
Slow (Woofer Slow Rate)
Specifies the low-speed rotation speed of the woofer.
Fast (Woofer Fast Rate)
Specifies the high-speed rotation speed of the woofer.
Level (Woofer Level)
Sets the volume of the woofer.
Trans Up (Woofer Transition Up)
Sets the rate at which the woofer rotation speeds up when
the rotation is switched from Slow to Fast. The higher the
value, the faster the transition occurs.
Trans Down (Woofer Transition Down)
Sets the rate at which the woofer rotation speeds up when
the rotation is switched from Fast to Slow. The higher the
value, the faster the transition occurs.
Tweeter
Slow (Tweeter Slow Rate)
Specifies the low-speed rotation speed of the tweeter.
Fast (Tweeter Fast Rate)
Specifies the high-speed rotation speed of the tweeter.
Tweeter (Tweeter Level)
Specifies the volume of the tweeter.
Trans Up (Tweeter Transition Up)
Sets the rate at which the tweeter rotation speeds up when
the rotation is switched from Slow to Fast. The higher the
value, the faster the transition occurs.
Trans Down (Tweeter Transition Down)
Sets the rate at which the tweeter rotation speeds up when
the rotation is switched from Fast to Slow. The higher the
value, the faster the transition occurs.
L out
R out
L in
R in
Rotary
2-Band EQ
2-Band EQ