Tascam DP-02 Musical Instrument User Manual


 
IMPORTANT SAFETY PRECAUTIONS
16 TASCAM DP-02/DP-02CF
1 – Starting out with your DP-02/DP-02CF
0 MASTER fader
Adjusts the stereo signal level output from the LINE
OUTPUT (L,R), PHONES, or DIGITAL OUT. Also, this
fader adjusts the recording level when performing a
track bounce or mix down.
q EFFECT RETURN control
On the DP-02, this knob adjusts the level of the inter-
nal effect return signals, or the external effect return
signals. (See “Block diagram” in the chapter 3 “specifi-
cations” on page 57.)
On the DP-02CF, this knob adjusts the level of the
return signals from the RETURN (L,R) jacks.
w REVERB key and ON/OFF key (DP-02 only)
The REVERB key brings up the REVERB screen to
adjust the internal reverb settings.
The ON/OFF key is used with the SHIFT key to turn the
reverb on or off. When on, the indicator lights up. (See
“Reverb” in chapter 4 “DP-02 Appendix” on page 62)
e EQ HIGH controls
Adjusts the level of the high frequencies for each track.
r EQ LOW controls
Adjusts the level of the low frequencies for each track.
t FREQ key
This key brings up the EQ FREQUENCY screen to
adjust the high and low frequencies (see “EQ settings
on page 31).
y EFFECT SEND controls
Adjust the level of each track’s signal sent to the SEND
jack.
On the DP-02, these controls also adjust the level of
each track sent to the internal reverb effects.
u PAN controls
Adjust the panning of the stereo mixed signal on each
track.
i REC keys
Press the REC key alone to put the track in recording
standby mode (only two tracks can be in recording
standby mode at a time), and the key flashes. Pressing
the key again cancels recording standby mode (see
“Recording” on page 24).
When used with the ASSIGN keys, the REC keys also
assign the input A or B to the tracks selected (1). (See
“Assigning inputs” on page 23).
o MUTE keys
These keys are used with the SHIFT key, and mute
the signal on each track when the signals are output.
The indicator on the left of the keys lights up (see
“Mixdown” on page 27).
p TRACK faders
Adjusts the play back level of each track.