Filter
Top Products
IMPORTANT SAFETY PRECAUTIONS
28 TASCAM DP-02/DP-02CF
1 – Starting out with your DP-02/DP-02CF
through the analog and digital outputs, and you can
record it on a stereo recorder.
NOTE
Note that while the PLAY (MASTER) key is lit steadily,
you cannot use the mixer controls, except for the
MASTER fader.
4. If you are happy with the mix, you can then exit the
mastering mode by pressing and holding the SHIFT
key and pressing the PLAY (MASTER) key until the
key is unlit.
If you want to do the mix again, press the MASTER
key until it flashes, and re-record. The new mix will
overwrite your previous mix.
T I P
If you want to save a mix from the unit as a file, you
can transfer it via USB to a computer (see “Exporting
the mastered stereo tracks” on page 47).
If a song has had a master stereo mix recorded and saved
with it, you can play back this master stereo mix whenever
the song is loaded, by pressing and holding the SHIFT key
and pressing the PLAY (MASTER) key until the key is lit
steadily and then pressing PLAY (¥).
To add the STEREO MIX inputs (through the analog
outputs only), you can play back the stereo master mix.
Any MIDI synchronization, etc. is output as the stereo
master mix is played back so that the output from a
sequencer, etc. can be added to the analog outputs, and
recorded on a stereo recorder (cassette, CD, MD or
computer audio program).
The stereo master mix can be “cloned” to a pair of stereo
tracks (see “CLONE TRACK” on page 51).