Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 59
4 – DP-02 Appendix
Multi-effect
The unit contains an input effector, which contains differ-
ent types of effects, grouped by the type of input (electric
guitar, acoustic guitar, vocals, etc.) that they are suitable
for.
Assigning the effect
Although there are two inputs, the multi-effect can only be
applied to one of them at a time.
The multi-effect produces a stereo output, so you can use it
on stereo pairs, and you can then assign the output to two
tracks (see “Assigning inputs” on page 23).
Press and hold the SHIFT key and press the EFFECT key
so that either the A or B indicator lights, showing the input
to which you want to apply the multi-effect.
There is a third setting in which neither indicator is lit,
showing that the multi-effect is not in use on either input.
Selecting the effect type
Press the EFFECT key to bring up the multi-effect selec-
tion and editing screen:
Use the cursor (§/¶) keys to highlight the TYPE value.
Rotate the DATA dial to scroll through the different effect
types available:
Elec.Guitar Electric guitar
Aco.Guitar Acoustic guitar
Bass Guitar Bass guitar
Vocal Vocals
Drum Drums and percussion
The effect (second line of the display) also changes as you
change the type, and so does the parameter value (on the
third line).
ª
ª
Selecting the effect
Use the cursor (§/¶) keys to highlight the PRESET value.
Turn the DATA dial to scroll through all available effects
(including those in other effect types). Effects available are
listed in “Available multi-effect settings” on page 60.
Setting the parameter
Each multi-effect has one parameter (shown as PARAM).
Use the cursor (§/¶) keys to highlight the PARAM value.
Turn the DATA dial to set the value of the parameter (the
parameter is different for different types of effects).
Setting the effect volume
Use the cursor (§/¶) keys to highlight the VOLUME value.
Set the volume of the effect from 0 to 127 by turning the
DATA dial.
ª
ª
ª