Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 73
4 – DP-02 Appendix
The following shows a list of the popup messages. On the DP-02, popup messages are displayed according to the situation.
Refer to this list to learn the details of each of the messages and how to remedy the trouble.
Blank CD Insert
CD-RW
“A blank CD has been inserted. Insert a CD-RW that is not blank”
An erased CD-RW or unwritten CD-R has been inserted in the CD-RW ERASE menu.
There is no need to erase the inserted CD.
Blank CD Insert
Opened CD
“A blank CD has been inserted. Insert a non-finalized CD.”
An erased CD-RW or unwritten CD-R has been inserted in the FINALIZE menu.
Insert the CD to be finalized.
Empty Export
Track
“There are no exportable tracks”
No audio data is recorded to tracks 1 to 8 in the CD EXPORT menu.
Finalized CD Insert
CD-RW
“A finalized CD has been inserted. Insert a CD-RW that is not blank.”
A finalized CD-R has been inserted in the CD-RW ERASE menu.
Only CD-RW disks can be erased.
Finalized CD Insert
Opened CD
“A finalized CD has been inserted. Insert a non-finalized CD.”
A finalized CD has been inserted in the finalize menu.
This CD does not need to be finalized.
Import File Not
Found
“The import file cannot be found. Insert the import CD.”
There is no import file in the inserted CD in the CD IMPORT menu.
Insert a CD written with import data.
Import File Too
Big
“The import file is too big.”
The size of the file to import equals or exceeds the free space on hard disk when executing an
import in the CD IMPORT menu.
Create more free space on hard disk by DEL/UNUSED, for example, to ensure sufficient free space
for reading the import file.
Invalid CD Insert
Backup CD
“An invalid CD has been inserted. Insert the backup CD.”
A CD not written with backup data has been inserted in the CD RESTORE menu.
Insert a CD written with backup data.
Invalid CD Insert
Blank CD
“An invalid CD has been inserted. Insert a blank CD.”
A CD other than a blank CD has been inserted when writing to CD by the MASTER, WRITE, CD
BACKUP or CD EXPORT menu. (This is also displayed when a finalized CD has been inserted when
writing by Track at Once.)
Insert a blank CD.
Invalid CD Insert
CD-RW
“An invalid CD has been inserted. Insert a CD-RW.”
A CD-R or other CD that cannot be erased has been inserted in the CD-RW ERASE menu.
Insert a CD-RW to be erased.
Invalid CD Insert
Import CD
“An invalid CD has been inserted. Insert the import CD.”
An audio CD, blank CD or other invalid CD has been inserted in the CD IMPORT menu.
Insert a CD written with import data.
Invalid CD Insert
Opened CD
“An invalid CD has been inserted. Insert a non-finalized CD.”
A CD that cannot be finalized has been inserted in the finalize menu.
Insert a CD to be finalized.
Low Capacity
Insert Blank CD
“A CD with low capacity has been inserted. Insert a blank CD with adequate capacity.”
The capacity of the CD was less than the data to be written when an attempt was made to make
two or more CDs having the same content after ending MASTER WRITE (Disc at Once) to CD, CD
BACKUP or CD EXPORT. (This message is displayed, for example, when writing is executed with
the CD capacity at 700 MB and the data capacity at 700 MB at the initial write, and a 650 MB CD is
inserted after “Another CD?” is displayed after writing ends.)
Insert a blank CD having adequate capacity.
No disk Insert
Backup CD
“A CD has not been inserted. Insert the backup CD.”
There is no CD in the CD tray in the CD RESTORE menu.
Insert a CD written with backup data.
No disk Insert
Blank CD
“A CD has not been inserted. Insert a blank CD.”
• There is no CD in the CD tray when writing to a CD in the MASTER WRITE or CD EXPORT menus.
• The CD tray was opened after preparation for backup was completed in the CD BACKUP menu.
Insert a blank CD.
Insert a blank CD.
Pop-up Massages