Filter
Top Products
LS9 Editor Owner’s Manual
13
INPUT CH window
This window displays the mix parameters of INPUT CH 1–16, 17–32, 33–48
(*),
or 49–64
(*).
The parameters shown
in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key
+ click) in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and select CH1-16/CH17-32/33-48
(*)
/49-64
(*)
●
Use the layer keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button
(*)
/ [49-64] button
(*)
●
On the LS9 itself, assign one of the USER DEFINED KEYS to [CH1-16]/[CH17-32]/[CH33-48]
(*)
/[CH49-64]
(*)
in
[OVERVIEW] of [LS9 EDITOR CONTROL], and execute the function
(*)
INPUT CH 33-48, 49-64 can be viewed only if LS9-32 is selected in the Model Select field of the Mixer Setup window when editing
offline, or when editing online with the LS9-32.
A Input patch
Click here to select the input source that will be assigned to the INPUT CH, from the
following choices.
(*)
INPUT jacks 17-32 and slot 2 can be viewed only if you’re editing offline and have selected LS9-32 in
the Model Select field of the Mixer Setup screen, or if you’re editing online with the LS9-32.
B HA GAIN
Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-
nal head amp (AD8HR) patched to the INPUT CH.
C 48V
Switches on/off the phantom power (+48V) of the internal head amp or of the external
head amp (AD8HR) patched to the INPUT CH.
NONE No assignment
IN 1–IN32
(*)
INPUT jacks 1–32
(*)
SLOT1-1...SLOT1-16,
SLOT2-1
(*)
...SLOT2-16
(*)
Input channels of an I/O card installed in a slot
2TR IN L, 2TR IN R L/R channels of the 2TR DIN jack
PB OUT L, PB OUT R L/R channels of USB memory recorder output
RACK1A, RACK1B...
RACK5L(A)...RACK8R(B)
L/R outputs of Rack 1–8
Overview window
1
2
3