Filter
Top Products
LS9 Editor Owner’s Manual
23
F BALANCE
Adjusts the left/right balance of the STEREO channel.
G SEL (Select)
Selects the channel for which you want to make settings. (You can specify L and R inde-
pendently.) This is linked with the STEREO/MONO MASTER section [SEL] keys on
the LS9’s panel.
H CUE
This button cue-monitors the signal of the STEREO/MONO channel. This is linked
with the STEREO/MONO MASTER section [CUE] keys on the LS9’s panel.
I ON
This switches the STEREO/MONO channel on/off. This is linked with the STEREO/
MONO MASTER section [ON] keys on the LS9’s panel.
J Fader
Adjusts the output level of the STEREO/MONO channel. This is linked with the STE-
REO/MONO MASTER section faders of the LS9’s panel.
The current fader value is shown in the numeric box immediately below the fader.
The numbers and alphabetical letters at the right of the fader indicate the mute groups
to which that channel belongs, and show the Recall Safe and Mute Safe status of the
channel. (For the significance of the numbers and alphabetical letters, see ➥ p.19).
K Channel number
This is the channel number (ST or M). You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of
your computer keyboard and double-click this, the Selected Channel window will open
as an additional view.
L Channel name
This text box shows the channel name. You can edit the channel name within this text
box.
The background color will be the same as the background color of the icon in the chan-
nel select area of the Selected Channel window.
7
8
9
J
L
K
6