Filter
Top Products
LS9 Editor Owner’s Manual
56
G ON (GEQ on/off)
Switches the currently selected GEQ module on/off.
H LINK
This button links the settings of two adjacent odd-numbered/even-numbered 31-band GEQ modules, or the
group A and group B settings of a Flex 15 GEQ. When you click this button, a window will ask you for confirma-
tion. Click the buttons for the modules you want to use as the parameter copy-source and copy-destination. If
you click the RESET BOTH button, the parameters of both modules will be reset to the default state.
I GEQ graph
This graph shows the response of the currently selected GEQ module.
J GEQ faders
These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numeri-
cal box below it. Hold down the <Ctrl>(< >) key and click to set the value to 0.00 dB.
K EQ FLAT
This button resets all GEQ faders to the 0 dB position.
L AVAILABLE BANDS (number of operable bands) (Flex 15 GEQ only
For a Flex 15 GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the
remaining number of bands that can be operated. If you have operated fifteen bands, this number will be zero,
and you won’t be able to operate any additional bands. If you want to operate another band in this state, you’ll
need to return a previously-operated band back to the 0 dB position.
7
J
K
8
9
● 31 Band GEQ
K
8
7
L
J
● Flex15GEQ