Filter
Top Products
LS9 Editor Owner’s Manual
24
The Custom Fader Layer allows you to create a freely selected combination of the LS9’s internal channels for each
user key. For details on operating each type of channel, refer to the Overview window for that channel.
In the initial state when the Editor has never been synchronized with the LS9 console, this window will
show the Administrator settings. However when you synchronize, this window will be displayed according
to the user level of the console.
Custom Fader Layer window
This window lets you view and edit the mix parameters for Custom Fader Layer CH 1–16 and 17–32
(*)
. The parame-
ters shown in this window can be selected from the [View] menu or from the menu that appears when you right-
click in the window.
You can display this window in either of the following ways.
● From the [Windows] menu, choose [Overview] and then choose “Custom Fader Layer (CH1-16)”/“Custom Fader Layer
(CH17-32)”
(*)
●
In the Master window, turn the Layer Keys CUSTOM [1-16] button/[17-32] button
(*)
on
(*)
Custom Fader Layer CH 17-32 can be displayed only if you’re editing offline and have selected LS9-32 in the Model Select field of the
Mixer Setup window, or if you are editing online with the LS9-32 connected.
Select the channels that you want to assign to the Custom Fader Layer (INPUT CH). You can also
make these settings in the “Custom Fader Layer Setup window.”
Custom Fader Layer window
NOTE