Filter
Top Products
LS9 Editor Owner’s Manual
22
STEREO/MONO window
In this window you can view and edit the parameters of the STEREO and MONO channels. The parameters shown
in the window can be selected from the [View] menu or the menu that appears when you right-click (<control> key
+ click) in the window.
You can access this window in the following ways.
● From the [Windows] menu, choose [Overview] and then choose “STEREO/MONO”
● Use the layer keys in the Master window to turn on the [STEREO] button
● On the LS9 console, assign a USER DEFINED KEY to [LS9 EDITOR CONTROL]-[OVERVIEW]-[ST/MONO], and exe-
cute it
A OUTPUT PATCH
This selects the output port assigned to the STEREO/MONO channel. The output
ports that can be selected are the same as for MIX (➥ p.18).
B EQ (Equalizer)
Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for
INPUT CH (➥ p.14).
C DYN1(Dynamics 1)
Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT
CH (➥ p.14).
D INS (Insert)
Enables/disables the insert-in. (The L/R settings are linked.)
E MATRIX SEND
Here you can view and edit the send levels of the signals sent from the STEREO/MONO
channel to MATRIX 1–8 bus. The method of operation and the meaning of the display
are the same as for MATRIX in the MIX window (➥ p.19).
2
1
4
5
3