27
Basic Operation
To add points to the route using the Route Review Page and the Find Menu:
1. Press MENU twice to open the Main Menu. Use the ARROW KEYPAD to select ‘Route’.
2. Use the
ARROW KEYPAD to select the desired route and press ENTER/MARK.
3. Use the
ARROW KEYPAD to highlight the spot in the route that you want to add the new point. (The
new point is added before the highlighted route point.) Press
MENU.
4. Highlight ‘Insert Waypoint’ and press
ENTER/MARK.
5. The Find Menu automatically opens for you to search for and select the waypoint or point of interest
you want to add to the route.
6. In the point Review Page, press
ENTER/MARK when ‘OK’ is highlighted to add the new point to the
route.
To use the Trip Planning feature:
1. Press MENU twice to open the Main Menu. Use the ARROW KEYPAD to select ‘Route’.
2. Use the
ARROW KEYPAD to select the desired route and press ENTER/MARK.
3. Press
MENU. Highlight ‘Plan Route’ and press ENTER/MARK.
4. Enter the desired data for Speed, Fuel Flow, Departure Time, and Departure Date. Press
QUIT to
return to the Route Review Page.
NOTE:
Fuel fl ow rates on your unit are measured in “units per hour”. System setting changes
for units of measure (statute, nautical or metric) do not affect the fuel fl ow measure. You
should enter fuel fl ow rates based upon available information for your vehicle (such as the
operator’s manual or performance specifi cations) and make note of the desired units of mea-
sure (such as gallons or liters).
Following a Route
Once a route has been created, it can be activated and used for navigation with the NAV/MOB key.
Refer to the previous pages for more information.
Using Routes
Route Review Page Options Menu
Creating a new route on the map
190-00335-00_0A.indd 27 4/7/2004, 1:50:26 PM
