70
Main Menu
Using the Alarms Tab
The Alarms Tab of the Main Menu allows you to defi ne alarm settings.
To access the Alarms Tab of the Main Menu:
1. Press MENU twice to open the Main Menu.
2. Highlight ‘Alarms’ from the vertical list of tabs using the
ARROW KEYPAD.
To set an alarm:
1. Press MENU twice to open the Main Menu.
2. Use the
ARROW KEYPAD to open the Alarms Tab.
3. Use the
ARROW KEYPAD to highlight the fi eld to the right of the alarm name you wish activate and
press ENTER/MARK.
4. Change the mode to ‘On’ (Dist or Time for the ‘Arrival’ alarm) and press
ENTER/MARK.
5. Highlight the next fi eld to the right and press
ENTER/MARK, then enter the desired settings and press
ENTER/MARK to fi nish.
When an alarm goes off, the alarm message appears on the display and the unit emits fi ve (5) beeps.
When you select an alarm to be persistent, the alarm message appears on the display and the unit beeps
until you press ENTER/MARK to acknowledge the alarm.
To set a persistent alarm:
1. Press MENU twice to open the Main Menu.
2. Use the
ARROW KEYPAD to open the Alarms Tab.
3. Use the
ARROW KEYPAD to highlight the box next to the alarm you would like to make persistent
(for example, ‘Anchor Drag’).
4. Press
ENTER/MARK to place a check mark in the ‘Persist’ box. When an alarm goes off, it sounds
until you acknowledge the alarm message by pressing ENTER/MARK.
Alarms Tab
Alarms Tab: ‘Nav’ tab
190-00335-00_0A.indd 70 4/7/2004, 1:51:00 PM
