Filter
Top Products
Command and Response Table for DSP SIS Commands
Command ASCII command
(host to device)
Response
(device to host)
Additional description
Audio Level Control, and Mix-point Selection
NOTE: The command format is the same, regardless of the control or mix-point to be set; the acceptable adjustment
range varies depending on the control or mix-point:
•The mic/line input gain range is – 18dB to +80dB, in 0.1dB increments.
•The pre-mixer gain range is –100dB to +12dB, in 0.1dB increments.
•The main mix-points range –35dB to +25dB, in 0.1dB increments.
•The post-mixer trim range is –12dB to +12dB, in 0.1dB increments.
•The output volume range is –100dB to 0dB, in 0.1dB increments.
All responses are shown with the DMP64 in Verbose mode 2 or 3.
Set a trim or gain (excluding
mic/line inputs)
E
G
X6)
*
X6!
AU
}
DsG
X6)
*
X6!]
Set trim or mix control
X6)
to
a value of
X6!
dB.
Example 1 (pre-mixer
gain):
E
G40105*2040AU
}
DsG40105*2040
]
Set the #6 pre-mixer gain to a
value of -0.8dB.
Example 2 (mix-point
gain):
E
G20001*2213AU
}
DsG20001*2213
]
Mix +16.5dB of mic 1 into
output 2.
Set a mic/line gain
E
G
X6)
*
X6@
AU
}
DsG
X6)
*
X6@]
Set mic/line gain control
X6)
to a value of
X6@
dB.
Example:
E
G40001*2288AU
}
DsG40001*2288
]
Set the mic/line input 2 gain
to a level of +24.0dB.
Set Output Volume
E
G
X6)
*
X6#
AU
}
DsG
X6)
*
X6#]
Set output volume control
X6)
to a value of
X6#
dB.
Example:
E
G60000*1548AU
}
DsG60000*1548
]
Output 1 volume set to a level
of -50.0dB.
Read a trim or mix
(excluding mic/line inputs)
E
G
X6)
AU
}
DsG
X6)
*
X6!]
DSP trim or mix control
X6)
is
set to a value of
X6!
dB.
Example 1
(post mixer gain control):
E
G60101AU
}
DsG60101*2103
]
Output 2, post mixer trim is
set to a value of +5.5dB.
Example 2 (mix control):
E
G20203AU
}
DsG20203*2140
]
+9.2dB of mic 3 is mixed into
output 4.
Read a mic/line gain
E
G
X6)
AU
}
DsG
X6)
*
X6@]
Mic/line gain control
X6)
is
set to a value of
X6@
dB.
Example:
E
G40000AU
}
DsG40000*2598
]
Mic/line input 1 gain is set to a
value of +55.0dB.
Audio Mute
NOTES:
• The post-mixer trim cannot be muted.
• All responses are shown with the mixer device in Verbose mode 2 or 3.
Audio mute
E
M
X6)
*1AU
}
DsM
X6)
*1
]
Mute audio point
X6)
.
Example:
E
M20301*1AU
}
DsM20301*1
]
Mute mix-point input 4 to
output 2.
Audio unmute
E
M
X6)
*0AU
}
DsM
X6)
*0
]
Unmute audio point
X6)
.
Read audio mute or level
E
M
X6)
AU
}
DsM
X6)
*
X6$]
NOTES:
X6)
= Audio level control, or mix-point select See table 1 on page 111 and 112.
X6!
= Level value; mix-point or post-mixer trim See tables 2, 3, and 4 on page 113 through 115.
X6@
= Mic/line gain level value See table 5 on page 116 through 119.
X6#
= Level value; pre-mixer gain and output volume See table 6 on page 120 through 123.
X6$
= Mute status 0 = unmute
1 = mute
DMP64 • SIS Programming and Control 105