Filter
Top Products
3. When the installer has completed the installation of the USB drivers, the following
screen appears (see figure 14):
Figure 14. Successful USB Driver Installation
4. Click Finish.
USB driver installation is complete.
DSP Configurator Program Basics
Starting the Program
NOTE: Extron recommends connection via the Ethernet LAN port for running the
DSPConfigurator program.
To run the DSP Configurator Program, click
Start > Programs > Extron Electronics > DSP Configurator > DSP
Configurator.
The DSP Configurator program starts in Emulate mode (see figure 15, next page). Also
(see Emulate Mode and Live Mode on page76) for details of mode operation.
Using the Program
In Emulate mode, audio parameters can be selected, then transferred to the DMP64
by switching to Live mode (while connected to a DMP64). Audio settings can also be
tailored while connected to the DMP64 which allows real-time auditioning of the audio
output as adjustments are made (see Emulate Mode and Live Mode on page76).
DMP64 • Software Control 18